Entertainment Centres
Here are the companies and businesses listed under the Entertainment Centres category.
Click a location on the left to narrow your search and find a supplier near you!
Let others know whether you recommend any of these companies by leaving feedback on their company pages.
THE MAGIC GROUP LTD
An opportunity to earn extra income from home catalogue shopping
www.themagicgroup.comTHE LANDMARK
The Queen's Theatre in Barnstaple and the Landmark Theatre in Ilfracombe. Information about both groups, their productions, locations, and con...
www.northdevontheatres.org.ukNAMCO STATION
Interactive experience of video games, bumper cars, 10 pin bowling, pin point shooting, and American pool.
www.namcostation.co.ukNAMCO (EUROPE) OPERATIONS LTD
Spares, components and ancillary product sales. Amutec. Kiddie rides and childrens ... Web & Mobile Content enquiries: +44 (0)20 8563 4440 ...
www.namco.co.ukCHICHESTER FESTIVITIES
Summer feast of the arts in the historic Cathedral city of Chichester, between the Downs and the sea.
www.chifest.org.ukLocal Entertainment Centres
Ask the community
Need help finding a company or supplier?
Is a home entertainment center a good place for xbox 360 ventilation?
I just experienced my first 3 red rings on my 360. I wanted to know if i should keep my new one in my home entertainment center. It's a piece of furniture where i put my dvd player, xbox, receiver, and wii. It's pretty open but kinda tight on the sides and there are a lot of wires in the back. Also people told me that buying a fan for the 360 is not worth it.
gigi s
Question answered by fish
If your new 360 is a second generation or newer (which it should be, unless you bought it used), you may be alright putting it in an entertainment center. Just make sure you have at LEAST 2" of clearance on all sides. If your cabinet has doors, make sure you open them up while playing, even if it's an open-backed cabinet. If it's a first generation box (Xenon or Zephyr motherboard), then I would strongly discourage placing it inside any enclosed area. You can tell which version you have by looking at the power supply connector (the end that you plug into your console). If there is a peg in the middle of the two rows of plugs, then it's first gen and you should keep it as cool as possible. I have a first generation (in fact, a launch day system) that I've never had a problem with, but I never kept it in a cabinet, and I never put a third party intercooler on it. I also have a Halo system (Falcon) which I have kept in my entertainment center since I got it, and I've also had no problems with it. I keep it on a shelf by itself with 2" of clearance on the sides, and 6" above it. Both the Falcon and the Jasper (started shipping 4th qtr 2008) are much, much, much more reliable and deal with heat so much better than the first run systems.What are the metal hinge pieces on a glass door of an entertainment centre called?
If you've got one of those inexpensive entertainment centres where you put your stereo and DVD player, what do you call the metal piece that acts as a hinge on the glass door in that it sort of grasps the glass door and a pin sits inside the stand? I'm trying to find replacement ones because I lost them moving.
Rick H
Question answered by D (A/V) ID
I think you answered your own question...it's a hinge. The other part of the hinge would be a clasp.My husband builds entertainment centers for people what would you pay for the labor and time he puts into it?
My husband recently spent $300 for materials to build an entertainment center for someone. There is a lot of detail and time he is putting into it. He will only make $50 off of this project. What would you pay for labor of something like this? I hope I make sense of what I am wanting to know. Thankyou!
coolgirl2430
Question answered by ClicketyClack
I think what your husband needs to do is call other people who build entertainment centers and describe the unit he has just built. Then ask them for what they would charge. It is less about what a person might pay or what is fair than it is about what a client could get the identical unit for elsewhere.What color should I paint my entertainment center?
Im moving to and apartment the living room is a bit small and my couches are tan microfiber, I was leaning to paint the wall light yellow but my current entertainment center is back, and I dont like it, it just looks like a big black square with a tv in it, and cant even see my decorations in the cubical, also I have a big coffe table i dont use, should I just use that and if so what color should i paint it?
Cupcakes
Question answered by Labon
teal is kinda fun....paint the coffee table & entertainment center same color. Put those cheap little battery operated lights out of view in a cubical or two for more subtle light as needed. (sm. round that turn on by touch) Hi-lighting any decorations. Throw a few teal mix pillows on couch, an accent rug to match on floor & new look is achieved.How can I stain my entertainment center a different stain color?
The solid wood entertainment center had been stained a light tan, I would like it to be a dark walnut color. Should I just sand it then stain?
jennyfurr1985
Question answered by NY1Krr
It's going to be alot of work. You wont be able to go lighter, lust darker as the stain has already penetrated the pores of the wood and you'll never get all of the old stain completely out. Start by using some paint stripper. Once the old finish comes loose, use steel wool and a scraper to get it all off. You may need to apply the paint stripper more than once. Then sand down with 220 grit sandpaper. You don't need to go crazy but make sure it;s smooth. Then re-stain and apply polyurethane or lacquer to finish.How can I take apart a wood entertainment center that has no screws or nails?
I have a six foot wide entertainment center in my upstairs apartment. It is very heavy and took about 6 people to lift it over my balcony. I don't have that many people to help me move it out, so I would like to see if there is a way to disassemble it and move it in pieces so that I can reassemble it again. There are no visible screws or nails.
Danielle
Question answered by captbob552
It probably is held together with small plastic studs. Try using a rubber mallet on a joint. Tap lightly to see if the joint comes apart.What kind of decor do you put on entertainment center shelving?
We have beautiful new entertainment center with pedestals on each side of the TV, which have two glass shelves, and glass doors encasing it. I am trying to find good ideas for decorating, like what to put on shelves, as well as on top of the whole unit.
hope
Question answered by IVY
It's a pretty busy place already. Maybe a few choice items that will fit the shelf space or take out a shelf for a different look, one big item and two smaller items in the other. Look around at what you already have and like, a pillow, a painting, etc. . Find something that would go with that item. I would not put anything on top. Maybe hang a picture above unit. Good luck!What to put in the large opening of my entertainment center?
I have an entertainment center that I am using. My TV does not fit in the opening alotted for a TV so it sits on top. What can I put inside of that large opening so it doesn't look so awkward and bare?
Kristle
Question answered by Billy Bong X
Fish tank.What are the correct measurements for trim pieces on my entertainment center?
My entertainment center measures 26 7/8" by 60 7/8" on the top with two lower shelfs measuring 11 7/8" by 60 7/8". I'm using simple corner guards for trim. I want them to fit together at 45 degree angles. I've tried twice before and the pieces were too short ( I didn't compensate for the trim's thickness) in one or both dimensions.
savagely_honest1
Question answered by William B
a 45 deg measurement is taken from the inside , so a 26 and 7/8: is where you want to cut it at a 45 deg, there will be more on the out side than inside,What would be the best way to paint a paper-finish entertainment center?
My entertainment center has been dinged up some and I'd like to try painting it...the only snag is that it is press board with a paper finish. Is it possible to paint it without it peeling? If I sand it will it make the paint adhere or just shred the paper finish? Thanks everyone.
jasarile
Question answered by Ashley S
Make sure you remove any loose peelings with sandpaper and get rid of the dust. Wipe the entire piece down with a cleaner and dry completely. Then prime with a high-bond primer such as Zinsser (this primer will stick to anything). Paint as desired. Use a polyurethane for a durable finish. The trick to painting these kinds of things is to take it slow and use the right primer and polyurethane. Good luck!
Businesses local to you in these sectors: